Stephen  L

V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE

by
thelightspd
Follow
Follow
Remix Model
thelightspd
thelightspd
|
Image 1 of 15
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
thelightspd
thelightspd
|
Image 1 of 15
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
2D
3D
Makes
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model
V8 ENGINE CAN COOLER **NOW WITH 8 CYL** EASY TO PRINT AND USE 3d model

This is the second generation of my famous Engine Can Cooler! The original model had 6 cylinders which made sense for a 6-pack of drinks... but you all WANTED MORE! So here is it with lots of changes.

  1. The first one printed the V6 block as one piece and as a result it barely fit on a Bambu bed. This one is modular... Meaning you print "half" at a time and assemble afterwards.
  2. This one has NO moving parts. The first one had a working crank that would pop the cans out... it was cool, but hard to print. This one has just an oil pan.
  3. Speaking of Oil Pans... it too is 2 piece for the ease of printing. There is a bolt that holds it together.
  4. The wrench.. the wrench you see on the handle is functional. This is how you tighten the bolts to assemble the motor etc. Once you're done, attach to the handle and take it with you.
  5. Leaking.. the two piece oil pan can leak. I suggest sealing...
  6. Speaking of leaking... The third gen one has no oil pan and has sealed bottoms for just this reason. Also 3rd gen will not have any "drain" plugs they cause leaking.
  7. The "ice covers" you're going to see a crazy angle... yes they print like that. They are the hardest part to print.

I really hope you all love this and give it a try. Lots of people made my last one. Let me know if you have any challenges.


278 Likes72 DownloadsMay 27, 2023


278 Likes72 DownloadsMay 27, 2023